Menu
ABB UA50-3–11
(Surplus Stock : New)
The UA50-30-11 220-230V 50Hz / 230-240V 60Hz is a 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational volt
ABB UA50-3–11
The UA50-30-11 220-230V 50Hz / 230-240V 60Hz is a 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational volt
Schneider LC1-D115-M7 Contactor
LC1D115 Schneider Electric 115 AMP, 3 pole contactor with an AC rated coil (must specify voltage below). Rated 75 H.P. 460 volts 3-Phase and has 1 N.O. and 1 N.C. base mounted auxiliary contact
ABB A300-30-11
(Surplus stock : New)
A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 690 V.Operated with control voltage, versions from 24….690 AC, 50 and 60 Hz
ABB SACE TMAX XT3N-250
(Surplus stock : New)
C.BREAKER TMAX XT3N 250 FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 250-2500 A
ABB AF400-30-11
(Surplus stock : New)
The AF400-30-11 is a 3 pole – 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 200 kW / 400 V AC (AC-3) or 350 hp / 480 V UL and switching power circuits up to 600 A (AC-1) or 550 A UL general use. Thanks to the AF technology, the c
Schneider Magnetic Contactor LC1-D150M7
( Surplus stock : New with Box )
Telemecanique (TeSys Control Deca) – 3-poles (3P; 3NO) – 150A (AC-3) rated current – 176-253Vac (220Vac nom.; 50Hz/60Hz) coil – Screw connections – 1NO+1NC aux. contacts – 75kW (380-400Vac; AC-3) / 100HP (460-480Vac; 3-phase; 50Hz/60Hz; UL/CSA) rated power – DIN rail – IP20 – Direct On Line (DOL) / FVNR (Full-Voltage Non-Rv.)
ABB MS132-25 Manual Motor Starter 20 … 25 A
(Surplus stock : New )
The MS132-25 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 25.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.
ABB Overload TA25GU-2.4
(Surplus Stock : New )
The TA25DU-2.4 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.
Transformer: TTM 250 KVA — SOLD OUT!
ABB AF305-30-11-13 Contactor
(Surplus stock : New )
ABB AF305-30-11-13 is a 3 pole – 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 160 kW / 400 V AC (AC-3) or 250 hp / 480 V UL and switching power circuits up to 500 A (AC-1) or 400 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.
91/149 Moo 5, Bannmai, Pakkret,
Nonthaburi 11120 THAILAND
16/224, 16/242 Moo 3, Bannmai, Mueang Pathum Thani, Pathum Thani 12000 THAILAND
16/224, 16/242 Moo 3, Bannmai,
Mueang Pathum Thani, Pathum Thani
12000 THAILAND
