Menu
The Repeater Power Supply D5014 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high-risk industries. It provides a fully floating dc supply for energizing conventional 2 wires 4-20 mA, active or passive, transmitters located in Hazardous Area and repeats the current in floating circuit to drive a Safe Area load. The module supports output current duplication, and it allows bi-directional communication signals, for HART® devices.
The Repeater Power Supply D5014 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety related systems for high-risk industries. It provides a fully floating dc supply for energizing conventional 2 wires 4-20 mA, active or passive, transmitters located in Hazardous Area and repeats the current in floating circuit to drive a Safe Area load. The module supports output current duplication, and it allows bi-directional communication signals, for HART® devices.
SIEMENS SIMATIC S7-200 CN 6ES7-0AA22-0XA0
Surplus stock : New open box
GEMS™ Transducer Sensor & Controls: 26ICBGB2502GBUB
Surplus stock : New
Gas Volume Corrector — ACTARIS Series CORUS, UNIFLO, etc.
(Surplus Stock: New Open Box)
Gas volume correctors are designed to automatically bring the measured volume of gas to normal conditions depending on the pressure, temperature and compressibility factor of the gas.
Models: CORUS, CORUS Compact, UNIFLO 1000 TCE.
GMI D1072D Din-Rail
(Surplus stock : Stock )
SIL 2 Temperature Signal Converter, Duplicator, Adder/Subtractor DIN-Rail Models D1072D
The single and dual channel DIN Rail Temperature Signal Converter D1072S and D1072D accepts a low level dc signal from millivolt, thermocouple or RTD temperature sensor, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load. Output signal can be direct or reverse. Duplicator function provides two independent outputs for the single input. Adder, subtractor, low/high selector functions provides two independent outputs representing input A, input B, input A plus input B, input A minus input B, low/high selector.
The single channel DIN Rail Relay Output, D1092S, is relay module suitable for the switching of safety related circuits, up to SIL 3 level according to IEC61508:2010 Ed. 2, for high-risk industries. It provides isolation between input and output contacts. D1092S provides 1 SPST contact for normally energized loads and 1 SPST contact for normally de-energized loads. When the relay is energized, the contacts are closed. When the relay is de-energized, the contacts are open. Compatibility with specific DO cards with pulse testing needs to be verified. This relay module is not suitable for low-current consumption applications (system-to-system signaling, driving LEDs, etc.).
Surplus stock : New
SIMATIC PCS7 SINGLE CPU410E 200PO : 1 System.
Surplus stock : New
MTL Barrier 7787+
( Surplus stock : New)
MTL7787+ 1 CHANNEL ZENER BARRIER, INTRINSIC SAFETY BARRIER, ANALOGUE OUTPUT, ATEX
Surplus stock : New
SIMATIC S7-400, Backup battery 3.6 V/2.3 AH for PS 405 4 A/10 A/20 A and PS 407 4 A/10 A/20 A
Ord. 6ES7971-0BA00
PROFIBUS FC Standard Cable GP, bus cable 2-wire, shielded, special configuration for quick assembly, Delivery unit: max. 1000 m, minimum order quantity 20 m sold by the meter
91/149 Moo 5, Bannmai, Pakkret,
Nonthaburi 11120 THAILAND
16/224, 16/242 Moo 3, Bannmai, Mueang Pathum Thani, Pathum Thani 12000 THAILAND
16/224, 16/242 Moo 3, Bannmai,
Mueang Pathum Thani, Pathum Thani
12000 THAILAND
