ABB T7S 1250 PR231/P LS/I In=1250A 3p F F

ABB Circuit Breaker T7S 1250 PR231/P LS/I In=1250A 3p F F

(Surplus stock : New )

C.BREAKER TMAX T7S 1250 FIXED THREE-POLE WITH FRONT TERMINALS AND LEVER OPERATING MECHANISM AND SOLID-STATE RELEASE IN AC PR231/P-LS/I R 1250

$3,400.00

 / EA

In Stock : 1

Available for Order

PRODUCT OVERVIEW

Technical Information 

Electrical Durability: 2000 cycle
                                        60 cycles per hour
Mechanical Durability: 10000 cycle
                                         60 cycles per hour
Number of Poles: 3
Power Loss: at Rated Operating Conditions per Pole 47 W
Rated Current (In): 1250 A
Rated Impulse Withstand Voltage (Uimp): 8 kV
Rated Insulation Voltage (Ui): 1000 V
Rated Operational Voltage: 690 V AC
Rated Service Short-Circuit Breaking Capacity (Ics): (220 V AC) 85 kA
                                                                                                (230 V AC) 85 kA
                                                                                                 (380 V AC) 50 kA
                                             (400 V AC) 50 kA
                                              (415 V AC) 50 kA
                                              (440 V AC) 50 kA
                                              (500 V AC) 40 kA
                                              (690 V AC) 30 kA
Rated Short-time Withstand Current Low Voltage (Icw):  for 1 s 20 kA
Rated Ultimate Short-Circuit Breaking Capacity (Icu):     (220 V AC) 85 kA
(230 V AC) 85 kA
(380 V AC) 50 kA
(400 V AC) 50 kA
(415 V AC) 50 kA
(440 V AC) 50 kA
(500 V AC) 40 kA
(690 V AC) 30 kA
Rated Uninterrupted Current (Iu) : 1250 A
Release : PR231/P-LS/I
Release Type : EL
Short-Circuit Performance Level : S
Standards : IEC
Sub-type : T7
Terminal Connection Type : Fixed Circuit-Breakers Front

PRODUCT RELATED

SIEMENS CONTACTOR 3RT2015-1AP01

Surplus stock : New

$35.50

 / EA

In Stock : 1

Available for Order

Surplus stock : New

SIEMENS 3RV2011-1GA10

Circuit breaker size S00 for motor protection, CLASS 10 A-release 4.5…6.3 A N-release 82 A screw terminal Standard switching capacity

$65.00

 / Ea

In Stock : 1

Available for Order

Schneider LC1-D18-M7 Contactor

Description: TeSys D contactor – 3P(3 NO) – AC- 3 – <= 440 V 18 A – 220 V AC coil

$36.00

 / EA

In Stock : 3

Available for Order

ABB AF580-30-11

(Surplus stock : New)

The AF580-30-11-70 is a 3 pole – 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 315 kW / 400 V AC (AC-3) or 500 hp / 480 V UL and switching power circuits up to 800 A (AC-1) or 750 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

$1,800.00

In Stock : 1

Available for Order

ABB MS325-12.5 Manual Motor Starter

(Surplus Stock : New)

The MS325-12.5 manual motor starter is a 54 mm width devices with a rated operational current of Ie = 12.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 75 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

$63.00

 / EA

In Stock : 4

Available for Order

ABB UA50-3–11

(Surplus Stock : New)

The UA50-30-11 220-230V 50Hz / 230-240V 60Hz is a 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational volt

age and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. – Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts – Control circuit: AC operated with laminated magnet circuit – Accessories: a wide range of accessories is available.

$125.00

 / EA

In Stock : 2

Available for Order

ABB MS132-25 Manual Motor Starter 20 … 25 A

(Surplus stock : New )

The MS132-25 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 25.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.

$73.00

 / Ea.

In Stock : 1

Available for Order

GMI D1072D Din-Rail

(Surplus stock : Stock )

SIL 2 Temperature Signal Converter, Duplicator, Adder/Subtractor DIN-Rail Models  D1072D

The single and dual channel DIN Rail Temperature Signal Converter D1072S and D1072D accepts a low level dc signal from millivolt, thermocouple or RTD temperature sensor, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load. Output signal can be direct or reverse. Duplicator function provides two independent outputs for the single input. Adder, subtractor, low/high selector functions provides two independent outputs representing input A, input B, input A plus input B, input A minus input B, low/high selector.

 

$300.00

 / EA

In Stock : 1

Available for Order

ABB AF305-30-11-13 Contactor

ABB AF305-30-11-13 Contactor

(Surplus stock : New )

ABB AF305-30-11-13 is a 3 pole – 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 160 kW / 400 V AC (AC-3) or 250 hp / 480 V UL and switching power circuits up to 500 A (AC-1) or 400 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

$810.00

 / EA

In Stock : 1

Available for Order

Surplus stock : New

ABB OS250D03P

(Surplus stock : New )

Switch Fuses, Front Operated, 3-pole, 03 (Left Side), DIN, 0, 1, Handle and shaft included,

$720.00

 / EA

In Stock : 12

Available for Order