Transformer: TTM 250 KVA — SOLD OUT!
Transformer: TTM 250 KVA -- SOLD OUT!
HV=22000
HV BIL=125 HV
CURRENT=6.56
TYPE =001H
PHASE=3
CLASS=ONAN
OIL TEMP.RISK=60 K
WIND. TEMP.RISK =65 K
MAX. AMB.TEMP. 40 °C
TANK PRESSURE = 7 PSI.
Fac.SN. =060063.
LV=400/230.
LV BIL. LV CURRENT=118-384
FREQUENCY =50 Hz.
IMP.VOLT.AT=75°C 4.10%.
OIL-250 Lit.
UNTANK MASS = 585 Kg
Schneider LC1-D18-M7 Contactor
Description: TeSys D contactor – 3P(3 NO) – AC- 3 – <= 440 V 18 A – 220 V AC coil
ABB OS400D03P
(Surplus stock : New)
Switch Fuses,Front Operated,3-pole,03 (Left Side),DIN,0,1,2,Handle and shaft included,
ABB XT2N-160-10-100
(Surplus stock : New)
C.BREAKER TMAX XT2N 160 FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 10-100 A
Power Factor Controller – EPCOS BR6000-R12
(Surplus Stock : New)
ABB Indoor Capacitor Unit CLMD43 50HZ 3PH 15/16 kvar 400/415v
(Surplus stock : New )
** Wholesale Available (16 Units) ** — BUY NOW! Stocks are Limited!
ABB MS132-25 Manual Motor Starter 20 … 25 A
(Surplus stock : New )
The MS132-25 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 25.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.
ABB Overload TA25GU-2.4
(Surplus Stock : New )
The TA25DU-2.4 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.
ABB OS250D03P
(Surplus stock : New )
Switch Fuses, Front Operated, 3-pole, 03 (Left Side), DIN, 0, 1, Handle and shaft included,
91/149 Moo 5, Bannmai, Pakkret,
Nonthaburi 11120 THAILAND
16/224, 16/242 Moo 3, Bannmai, Mueang Pathum Thani, Pathum Thani 12000 THAILAND
16/224, 16/242 Moo 3, Bannmai,
Mueang Pathum Thani, Pathum Thani
12000 THAILAND